| Minimum Spindle to Column Distance (Decimal Inch) | : | 6.0000 |
| Minimum Spindle to Column Distance (Inch) | : | 6 |
| Maximum Spindle to Table Distance (Inch) | : | 25.2500 |
| Maximum Spindle to Table Distance (Decimal Inch) | : | 25.2500 |
| Minimum Spindle Speed | : | 60 |
| Table Length (Inch) | : | 49 |
| Table Width (Inch) | : | 9 |
| Maximum Spindle Speed | : | 4500 |
| Forward Head Tilt (Degrees) | : | 90 |
| Phase | : | Three |
| Backward Head Tilt (Degrees) | : | 90 |
| Left-Hand Head Tilt (Degrees) | : | 45 |
| Left-hand Head Tilt | : | 45 |
| Right-Hand Head Tilt (Degrees) | : | 90 |
| Right-hand Head Tilt | : | 90.0 |
| Cross Travel (Decimal Inch) | : | 12.0000 |
| Cross Travel | : | 12.0 in |
| Longitudinal Travel | : | 36.0 in |
| Longitudinal Travel (Decimal Inch) | : | 36.0000 |
| Knee Travel (Decimal Inch) | : | 16.0000 |
| Knee Travel | : | 16.0 in |
| Quill Diameter (Inch) | : | 3-3/8 |
| Quill Diameter (Decimal Inch) | : | 3.3750 |
| Horsepower | : | 3.00 |
| Voltage | : | 230V; 460V |
| Table Load Capacity (Lb.) | : | 550.00 |
| Ram Travel Length (Decimal Inch) | : | 13.3750 |
| Ram Travel Length (Inch) | : | 13-3/8 |
| Spindle Speed Control | : | Variable Speed Pulley |
| Spindle Taper Size | : | R8 |
| Spindle Travel Length (Decimal Inch) | : | 5.0000 |
| Spindle Travel Length (Inch) | : | 5 |
| Number Of T-slots | : | 4 |
| UNSPSC Code | : | 23242503 |
| Includes | : | Jet Elite Mill ETM-949 with 3-Axis ACU-RITE 200S (Quill) DRO & Servo X-Axis Powerfeed |
| Standards | : | CSA; UL |
| Maximum Spindle To Column Distance (Decimal Inch) | : | 19.0000 |
| Maximum Spindle To Column Distance (Inch) | : | 19 |
| Certification | : | CSA; UL |
| Warranty | : | 3 Year |