| Minimum Spindle to Column Distance (Decimal Inch) | : | 4.5000 |
| Minimum Spindle to Column Distance (Inch) | : | 4-1/2 |
| Minimum Spindle to Column Distance (mm) | : | 4.50 |
| Maximum Spindle to Table Distance (Inch) | : | 19.0000 |
| Maximum Spindle to Table Distance (mm) | : | 19.00 |
| Maximum Spindle to Table Distance (Decimal Inch) | : | 17.5000 |
| Minimum Spindle Speed | : | 60 |
| Table Length (Inch) | : | 49 |
| Table Width (Inch) | : | 9 |
| Maximum Spindle Speed | : | 4200 |
| Forward Head Tilt (Degrees) | : | 45 |
| Phase | : | Three |
| Backward Head Tilt (Degrees) | : | 45 |
| Left-Hand Head Tilt (Degrees) | : | 90 |
| Left-hand Head Tilt | : | 90 |
| Right-Hand Head Tilt (Degrees) | : | 90 |
| Right-hand Head Tilt | : | 90 |
| Cross Travel (Decimal Inch) | : | 12.0000 |
| Cross Travel | : | 12 in |
| Longitudinal Travel | : | 34 in |
| Longitudinal Travel (Decimal Inch) | : | 34.0000 |
| Knee Travel (Decimal Inch) | : | 14.5000 |
| Knee Travel | : | 14.5 in |
| Quill Diameter (Inch) | : | 3-3/8 |
| Quill Diameter (Decimal Inch) | : | 3.3750 |
| Horsepower | : | 3.00 |
| Voltage | : | 230V; 460V |
| Table Load Capacity (Lb.) | : | 660.00 |
| Ram Travel Length (Inch) | : | 14-1/2 |
| Spindle Speed Control | : | Variable Speed Pulley |
| Spindle Taper Size | : | R8 |
| Spindle Travel Length (Decimal Inch) | : | 5.0000 |
| Spindle Travel Length (Inch) | : | 5 |
| Overall Height (Decimal Inch) | : | 85.0000 |
| Overall Height (Inch) | : | 85 |
| Overall Length (Inch) | : | 65-1/2 |
| UNSPSC Code | : | 23242503 |
| Overall Depth (Mm) | : | 63.00 |
| Includes | : | Ram Mount Adapter Plate Kit Accessories; X-Axis 1-32 in/min Speed Mill Power Feed; 12 x 36 in 2-Axis MN300 Mill Kit |
| Spindle Power Feed Rate Per Minute (in/rev) | : | 0.0015; 0.0030; 0.0060 |