PART OF THE NOVA PLATFORM · KAMPALA, UGANDA · MALATYA, TURKEY · GLASGOW, SCOTLAND
TITAN FLOW CONTROL 4 in. Ductile Iron Dual Disc Wafer Check Valve w/ Nitrile Rubber Seat & SS Disc - ANSI Class 150 CV41DSB0400
Titan Flow Control

TITAN FLOW CONTROL 4 in. Ductile Iron Dual Disc Wafer Check Valve w/ Nitrile Rubber Seat & SS Disc - ANSI Class 150 CV41DSB0400

Part No. CV41DSB0400 Unit EA
Sizes 2 - 8 in. - Larger sizes available - Please call for more information
Type Wafer - Dual Disc Check Valve
ASME Class 150 (2 - 6 in. sizes provide dual pressure service - Class 150/300)
Body Ductile Iron (ASTM A536)
Seat Nitrile Rubber
Disc Stainless Steel
Pricing available on request — ACG will respond within 24 hours with a full proposal.
Send requirement directly
Sizes 2 - 8 in. - Larger sizes available - Please call for more information
Type Wafer - Dual Disc Check Valve
ASME Class 150 (2 - 6 in. sizes provide dual pressure service - Class 150/300)
Body Ductile Iron (ASTM A536)
Seat Nitrile Rubber
Disc Stainless Steel
Class 150 (2 -24 in.) 250 PSI @ 100°F
Class 300 (2 -6 in.) 640 PSI @ 100°F
Nitrile Rubber Temp. Range -20 - 250°F
Stainless Steel Spring Temp. Rating 450°F
Low Cracking Pressure 1/4 PSI
Referenced Standards & Codes API 594 - Valve Design and Manufacture; AWWA C518 - Face-to-Face Dimensions; ASME B16.34 - Valves - Flanged, Threaded, and Welding End; ASME B16.42 - Ductile Iron Pipe Flanges and Flanged Fittings; API 598 - Valve Inspection and Pressure Test
SKU TFCCV41DSB0400
Manufacturer Titan Flow Control
Material Ductile Iron
Pressure 250 PSI
Product Type Wafer
Size 4 in.
Weight 14.00 LBS

Titan Flow Control CV 41-DI Ductile Iron Dual Disc Wafer Type Check Valve with Nitrile Rubber Seat & SS Disc Check valves are automatic shut-off valves that are commonly used for preventing backflow or drainage in a piping system. Often applied on the discharge side of pumps, check valves prevent the system from draining if the pump stops and protects against backflow, which could harm the pump and/or other equipment. Features Cost Efficient Design: Low weight and short laying length produce savings in initial cost, space requirements, and installation when compared to full body, swing type check valves Minimal Head Loss: Contour of body provides a short and straight flow path that generates very little turbulence - Additionally, the spring loaded discs are designed with very low cracking pressure which reduces the amount of energy required to open the valve Quick Closure to Reduce Water Hammer: Silent shut-off is achieved via the fully automatic, spring assisted disc that closed near zero flow velocity - The lightweight, split disc design creates a positive shutoff prior to flow reversal and helps to keep slamming and surges to a minimum Ductile Iron Body: Ductile iron body maintains the anti-corrosive properties of cast iron while achieving a yield strength comparable to carbon steel - Ductile iron also offers higher pressure/temperature rating than cast iron Resilient Soft Seats: Resilient soft seats ensure a bubble tight seal that meets or exceeds API 598 test requirements Versatile Design: Sizes 2 - 6 in. utilize a unique scallop design that permits dual pressure service (ASME Class 150 and 300) - Sizes 8 - 12 in. are only rated for ASME Class 150 Specifications Sizes: 2 - 8 in. - Larger sizes available - Please call for more information Type: Wafer - Dual Disc Check Valve ASME Class: 150 (2 - 6 in. sizes provide dual pressure service - Class 150/300) Body: Ductile Iron (ASTM A536) Seat: Nitrile Rubber Disc: Stainless Steel Pressure/Temperature Rating: Class 150 (2 -24 in.): 250 PSI @ 100°F Class 300 (2 -6 in.): 640 PSI @ 100°F Nitrile Rubber Temp. Range: -20 - 250°F Stainless Steel Spring Temp. Rating: 450°F Low Cracking Pressure: 1/4 PSI Referenced Standards & Codes: API 594 - Valve Design and Manufacture; AWWA C518 - Face-to-Face Dimensions; ASME B16.34 - Valves - Flanged, Threaded, and Welding End; ASME B16.42 - Ductile Iron Pipe Flanges and Flanged Fittings; API 598 - Valve Inspection and Pressure Test Downloads Wafer Style - Dual Plate Check Valve Installation - Operation - Maintenance Guide (PDF Download)

This is your item. Ready to proceed?

Add it to your RFQ basket or submit your requirement directly — ACG will respond within 24 hours with pricing, availability and delivery options.

RFQ Basket

Your RFQ basket is empty

Browse the catalogue and add items to build your requirement list Browse catalogue
Search