PART OF THE NOVA PLATFORM · KAMPALA, UGANDA · MALATYA, TURKEY · GLASGOW, SCOTLAND
TITAN FLOW CONTROL 4 in. Carbon Steel Short Pattern Wafer Swing Check Valve w/ Nitrile Rubber Seat & Seal - ASME Class 150 CV12C0400
Titan Flow Control

TITAN FLOW CONTROL 4 in. Carbon Steel Short Pattern Wafer Swing Check Valve w/ Nitrile Rubber Seat & Seal - ASME Class 150 CV12C0400

Part No. CV12C0400 Unit EA
Sizes 2 - 8 in. - Larger sizes available - Please call for more information
Type Wafer - Single Disc - Short Pattern Design
ASME Class 150
Body Carbon Steel (A216 Gr. WCB)
Seat & Seal Nitrile Rubber
Low Cracking Pressure 1/4 PSI
Pricing available on request — ACG will respond within 24 hours with a full proposal.
Send requirement directly
Sizes 2 - 8 in. - Larger sizes available - Please call for more information
Type Wafer - Single Disc - Short Pattern Design
ASME Class 150
Body Carbon Steel (A216 Gr. WCB)
Seat & Seal Nitrile Rubber
Low Cracking Pressure 1/4 PSI
Referenced Standards & Codes API 598 B16.5 - Valve Testing; ASME B16.34 - Valves - Flanged, Threaded, & Welding End; ASME 150 - Flange Standard Conformity
Markets Oil & Gas Production, General Industry, Chemical & Petrochemical
SKU TFCCV12C0400
Manufacturer Titan Flow Control
Material Carbon Steel
Pressure 275 PSI
Product Type Wafer
Size 4 in.
Weight 7.00 LBS

Titan Flow Control CV 12-CS Carbon Steel Short Pattern Wafer Type Swing Check Valve with Nitrile Rubber Seat & Seal Check valves are automatic shut-off valves that are commonly used for preventing backflow or drainage in a piping system. Often applied on the discharge side of pumps, check valves prevent the system from draining if the pump stops and protects against backflow, which could harm the pump and/or other equipment. Note: This valve is intended for liquid service that is steady, clean (no abrasives or solids), and non-pulsating. Flow-rate must not exceed 15 ft/sec. Features Robust Design: This is a self-acting, not-return, single plate, wafer type swing check valve which provides high quality and reliability within a simplified construction Minimal Head Loss: The low inertia disc is designed to open and close under low differential pressure conditions - Also, the short pattern design and straight flow path minimize pressure drop across the valve Economical Design: The low weight and short face-to-face dimensions provide an economical, space-saving solution - Additionally, flange gaskets are typically not required due to the built-in, body seal o-rings Resilient Soft Seats: Soft seats combined with a gravity assisted disc help to ensure a positive shutoff which creates a bubble tight seal that meets or exceeds API 598 leakage requirements Versatile Design: This valve can be installed between weld neck or slip-on type companion flanges of different standards - This valve can not be installed in a vertical pipeline with a downward flow Fugitive Emission Design: The one-piece body design eliminates potential leak paths to the environment so there are no body emissions Specifications Sizes: 2 - 8 in. - Larger sizes available - Please call for more information Type: Wafer - Single Disc - Short Pattern Design ASME Class: 150 Body: Carbon Steel (A216 Gr. WCB) Seat & Seal: Nitrile Rubber Seat & Seal Temp. Range (Nitrile Rubber): -20 - 250°F ASME Class 150 Pressure/Temperature Rating: 275 PSI @ 100°F Low Cracking Pressure: 1/4 PSI Referenced Standards & Codes: API 598 B16.5 - Valve Testing; ASME B16.34 - Valves - Flanged, Threaded, & Welding End; ASME 150 - Flange Standard Conformity Markets: Oil & Gas Production, General Industry, Chemical & Petrochemical Downloads Wafer Style - Dual Plate Check Valve Installation - Operation - Maintenance Guide (PDF Download)

This is your item. Ready to proceed?

Add it to your RFQ basket or submit your requirement directly — ACG will respond within 24 hours with pricing, availability and delivery options.

RFQ Basket

Your RFQ basket is empty

Browse the catalogue and add items to build your requirement list Browse catalogue
Search