| Series | S Series - Widebase Submersible |
| Suction | 3 in. (80 mm.) |
| Discharge | 3 in. (80 mm.) |
| Flange | NPT |
| Flow-Rate | 280 GPM |
| Solids Handling | 0.38 in. (10 mm.) |
| Casing | Ductile Iron |
| Impeller/Rotor | Ductile Iron |
| Drive | 460V 3 Phase Electric Motor |
| Seal | Tungsten Carbide |
| Diffuser | Ductile Iron 80-60-03; Maximum Operating Pressure 71 psi (490 kPa) |
| Impeller Material | Ductile Iron 60-40-18 |
| Suction Head | Ductile Iron 65-45-12 |
| Intermediate | Aluminum Alloy 356-T6 |
| Motor Housing | Aluminum Alloy 356-T6 |
| Motor Shaft | Stainless Steel 416 |
| Bearings | Upper, Open Single Row Ball Bearing; Lower, Open Double Row Ball Bearing |
| Discharge Elbow | Aluminum Alloy 356-T6 |
| Gaskets | Cork with Nitrile Binder (NC710) |
| O-Rings | Nitrile Rubber |
| Wetted Hardware | Standard Plated Steel and Stainless Steel |
| Strainer | Urethane Coated Steel. 50.6% Open Area, 0.38 in. (9,6 mm) Diameter Openings |
| Hoisting Bail | Urethane Coated Steel |
| Motor | Oil Filled Enclosure; 5.0 H.P.; 3450 R.P.M. |
| Three Phase | 200/230/460/575 Volt, 60 Hz, 18/16/8/6.5 Full Load AMPS, 5.3 kW (Max.) |
| Power Cable | 6 Wire; Type GGC; 8 AWG; 3 Power Conductors, 2 Ground and 1 Ground Check. Nominal Length 50 Feet (15 m) Standard |
| Recommended Generator Size | 15 kW Across the Line Start |
| Seal Type | Double, Mechanical, Type 2, Oil Lubricated |
| Maximum Temperature of Liquid Pumped | 122 F (50 C) |
| Weight | 160.00 LBS |
Gorman-Rupp Widebase submersible dewatering pump designed for high-head, high-volume operation in applications where large solids are not a problem. Built to operate quietly, effectively and safely with minimal maintenance.
This is your item. Ready to proceed?
Add it to your RFQ basket or submit your requirement directly — ACG will respond within 24 hours with pricing, availability and delivery options.