| Series | S Series - Slimline Submersible |
| Model | S2B1 |
| Suction | 2 in. (50 mm.) |
| Discharge | 2 in. (50 mm.) |
| Flange | NPT |
| Flow-Rate | 200 GPM |
| Solids Handling | 0.31 in. (8 mm.) |
| Casing | Cast Iron |
| Impeller/Rotor | Copper Alloy |
| Drive | 460V 3 Phase Electric Motor |
| Seal | Tungsten Carbide |
| Suction Casing | Gray Iron 30; Maximum Operating Pressure 39 psi (269 kPa) |
| Impeller Material | Copper Alloy C86500 |
| Seal Plate | Gray Iron 30 |
| Intermediate | Aluminum Alloy 356-T6 |
| Motor Housing | Aluminum Alloy 356-T6 |
| Motor Shaft | Stainless Steel 17-4 PH |
| Bearings | Upper and Lower, Open Single Row Ball Bearing |
| Discharge Flange | Aluminum Alloy 356-T6 |
| Gaskets | Cork with Nitrile Binder (NC710) |
| O-Rings | Nitrile Rubber |
| Wetted Hardware | Standard Plated Steel and Stainless Steel |
| Strainer | Urethane Coated Steel; 47% Open Area, 0.31 in. (7,9 mm) Diameter Openings |
| Hoisting Bail | Urethane Coated Steel |
| Motor HP | 2.0 H.P. |
| Motor Speed | 3450 R.P.M. |
| Motor Frequency | 60 Hz |
| Three Phase Voltage Options | 200/230/460/575 Volt |
| Maximum Temperature of Liquid Pumped | 122°F (50°C) |
| Weight | 108.00 LBS |
Gorman-Rupp Slimline submersible dewatering pump designed for compact spaces like drilled wells, narrow cofferdams and hard-to-reach places. Features dual seals for protection, abrasion-resistant impeller, and includes NEMA Type 3R rainproof control box.
This is your item. Ready to proceed?
Add it to your RFQ basket or submit your requirement directly — ACG will respond within 24 hours with pricing, availability and delivery options.