| Part | S2A1 115V 1P |
| Series | S Series - Widebase Submersible |
| Model | S2A1 |
| Suction | 2 in. (50 mm.) |
| Discharge | 2 in. (50 mm.) |
| Flange | NPT |
| Flow-Rate | 150 GPM |
| Solids Handling | 0.31 in. (8 mm.) |
| Casing | Ductile Iron |
| Impeller/Rotor | Ductile Iron |
| Drive | 115V 1 Phase Electric Motor |
| Seal | Carbon/Ni-Resist |
| Diffuser | Ductile Iron 80-60-03; Maximum Operating Pressure 49 psi (338 kPa) |
| Impeller | Ductile Iron 60-40-18 |
| Wear Plate | Carbon Steel 1045 |
| Intermediate | Aluminum Alloy 356-T6 |
| Motor Housing | Aluminum Alloy 356-T6 |
| Motor Shaft | Stainless Steel 17-4 PH |
| Bearings | Upper and Lower, Open Single Row Ball Bearing |
| Discharge Flange | Aluminum Alloy 356-T6 |
| Gaskets | Cork with Nitrile Binder (NC710) |
| Wetted Hardware | Standard Plated Steel |
| Strainer | Urethane Coated Steel; 50% Open Area, 0.31 in. (7,9 mm) Diameter Openings |
| Hoisting Bail | Urethane Coated Steel |
| Motor | Oil Filled Enclosure. 2.0 H.P.; 3450 R.P.M.; 60 Hz. 115/230 Volt, Single Phase: 28.0/14.0, Full Load AMPS, 2.8/2.8 kW (Max.) |
| Power Cable | (115V) 4 Wire; Type GGC; 8 AWG; 3 Power Conductors, 2 Ground and 1 Ground Check. Nominal Length 50 Feet (15 m) Standard. |
| Recommended Generator Size | 6 kW Across the Line Start |
| Seal Type | Double, Mechanical Oil Lubricated |
| Maximum Temperature of Liquid Pumped | 122°F (50°C) |
| Weight | 103.00 LBS |
Gorman-Rupp Widebase submersible dewatering pump designed for high-head, high-volume operation in applications where large solids are not a problem. Features dual seals, abrasive-handling impeller, and corrosion-resistant stainless hardware. Control panel included.
This is your item. Ready to proceed?
Add it to your RFQ basket or submit your requirement directly — ACG will respond within 24 hours with pricing, availability and delivery options.