| Model | ISTMVS4-VL2 |
| Horsepower | 4 HP |
| Pump Type | Variable speed, two-stage centrifugal type |
| Model Length Range | 95 in. - 156 in. |
| Flow Rate | 140 GPM |
| Check Valve Diameter | 2-3/4 in. |
| Check Valve Material | Fluorocarbon seal with cast aluminum body and steel backing washer |
| Pressure Relief Valve | Standard model relieves at 40 psi and resets above 35 psi |
| Max Operating Pressure | 24 psi to 42 psi deadhead (selectable) |
| Power Requirements | Three-phase incoming power supply, 200-250 VAC, 50 or 60 Hz |
| Max Line Draw | 20 Amps |
| Max Motor Draw | 15 Amps |
| Max Liquid Viscosity | 70 SSU at 60 °F |
| Fuel Compatibility | Diesel with up to 20% Biodiesel, 100% Biodiesel, up to 85% ethanol with gasoline, 20% MTBE, 20% ETBE or 17% TAME with gasoline |
| Weight | 160.00 LBS |
| Certifications | cULus Listed |
| Features | MagShell with 45% increased flow area, active air eliminator, variable length telescoping shaft, contractor electrical disconnect, manual pressure relief |
4 HP variable speed submersible turbine pump with MagShell featuring consistent flow rates for low throughput fuels. UL listed for alcohol-gas fuel mixtures including up to 85% ethanol with gasoline, with variable length range from 95 to 156 inches fitting 94% of all known installations.
This is your item. Ready to proceed?
Add it to your RFQ basket or submit your requirement directly — ACG will respond within 24 hours with pricing, availability and delivery options.