PART OF THE NOVA PLATFORM · KAMPALA, UGANDA · MALATYA, TURKEY · GLASGOW, SCOTLAND
EMERSON FISHER C471M Series 3 in. MNPT x FNPT Jet Bleed Steel Internal Valve w/ P340 Latch, 375 GPM Spring C471M-24-37
Emerson Fisher

EMERSON FISHER C471M Series 3 in. MNPT x FNPT Jet Bleed Steel Internal Valve w/ P340 Latch, 375 GPM Spring C471M-24-37

Part No. C471M-24-37 Unit EA
Series C471M
Type Tee Body with P340 Latch
Inlet 3 in. MNPT
Outlet 3 in. FNPT
Body Material Steel
Maximum Allowable Inlet Pressure 400 psig / 27.6 bar WOG
Pricing available on request — ACG will respond within 24 hours with a full proposal.
Send requirement directly
Series C471M
Type Tee Body with P340 Latch
Inlet 3 in. MNPT
Outlet 3 in. FNPT
Body Material Steel
Maximum Allowable Inlet Pressure 400 psig / 27.6 bar WOG
Temperature Capabilities -20° to 150°F (-29° to 66°C)
Certifications UL, CRN
Warranty 10 Years
SKU FIC471M2437
Manufacturer Emerson Fisher
Size 3 in.
Material Steel
Pressure 400 PSI
Weight 36.00 LBS

Emerson Fisher's C471M Series Jet Bleed Internal Valves are designed with two outlets, bottom and side. The side outlet permits installing horizontal piping immediately adjacent to the tank without the need for extra pipe fittings. These valves are typically used on the inlets and outlets of bobtail and transport trucks and on large stationary storage tanks. They can also be installed in-line. Designed for propane, butane, or NH3 at ambient temperatures, the valves can be used on other compressed gases, but the user should check with the factory to make sure the valves are suitable for the particular service.This product is backed by a 10 year warranty. Note: Includes the P340 Latch. Features Patented Rapid Equalization Bleed Area Unique Serviceability Features Excess Flow Closure Back Check Feature Spring loaded polytetrafluoroethylene (PTFE) stub shaft packing PTFE wear pads Rulon® Bushings at critical wear points Manual, Cable, or Air Open/Close valve actuators Thermal Fusible links or plugs melt at 212 to 220°F / 100 to 104°C and allow valve closure in the event of a fire at the valve Specifications Series: C471M Type: Tee Body with P340 Latch Inlet: 3 in. MNPT Outlet: 3 in. FNPT Body Material: SteelClosing Flow: 375 GPM Maximum Allowable Inlet Pressure: 400 psig / 27.6 bar WOG Temperature Capabilities: -20° to 150°F (-29° to 66°C) Certifications: UL, CRNWarranty: 10 Years Warning Warning: Failure to follow these instructions or to properly install and maintain this equipment could result in an explosion and/or fire causing property damage and personal injury or death. Fisher® equipment must be installed, operated and maintained in accordance with federal, state and local codes and Emerson Process Management Regulator Technologies, Inc. (Emerson™) instructions. The installation in most states must also comply with NFPA No. 58 and ANSI Standard K61.1. Only personnel trained in the proper procedures, codes, standards and regulations of the LP-Gas industry should install and service this equipment. The internal valve must be closed except during product transfer. A line break downstream of a pump may not actuate the excess flow valve. If any break occurs in the system or if the excess flow valve closes, the system should be shut down immediately. Downloads Instruction Manual (PDF Download) Internal Valve Data Sheet (PDF Download)

This is your item. Ready to proceed?

Add it to your RFQ basket or submit your requirement directly — ACG will respond within 24 hours with pricing, availability and delivery options.

RFQ Basket

Your RFQ basket is empty

Browse the catalogue and add items to build your requirement list Browse catalogue
Search