PART OF THE NOVA PLATFORM · KAMPALA, UGANDA · MALATYA, TURKEY · GLASGOW, SCOTLAND
GPI Flomec Oval Gear Flow Meter 1-1/2 in. AL/PPS #150 + 4-20mA OM040A001-842A0
GPI

GPI Flomec Oval Gear Flow Meter 1-1/2 in. AL/PPS #150 + 4-20mA OM040A001-842A0

Part No. OM040A001-842A0 Unit EA
Accuracy (%of reading) - Meter +/- 0.5%
Repeatability - Meter +/- 0.03%
Metric Operating Fluid Temp - Min -40°
Metric Operating Fluid Temp - Max 80°
Metric Operating Fluid Temp - Units C
Std Operating Fluid Temp - Max 176°
Pricing available on request — ACG will respond within 24 hours with a full proposal.
Send requirement directly
Accuracy (%of reading) - Meter +/- 0.5%
Repeatability - Meter +/- 0.03%
Metric Operating Fluid Temp - Min -40°
Metric Operating Fluid Temp - Max 80°
Metric Operating Fluid Temp - Units C
Std Operating Fluid Temp - Max 176°
Std Operating Fluid Temp - Min -40°
Std Operating Fluid Temp - Units F
Std Pressure Rating Flange Rule
Safety Classification Safe Area Only
Std Flow Range - Min 4
Std Flow Range - Max 66
Std Flow Range - Units GPM
Metric Flow Range - Min 15
Metric Flow Range - Max 250
Metric Flow Range - Units L/min
Technology Oval Gear
Line Size 1-1/2-inch
Fitting Type - Meter #150 ANSI Flange
Housing Material - Meter Aluminum

Description1-1/2-inch Aluminum Blind Transmitter with #150 ANSI Flange Fittings. For fuel additives, solvents, grease, oil, paint.The FLOMEC Aluminum Oval Gear Series is the ideal economical choice for high-accuracy batching, dosing, or packaging of clean solvents, grease, oil, additives, and other high-viscosity fluids. Oval gear technology features rotors that provide highly accurate and repeatable direct volumetric readings. No requirement for flow conditioning or straight pipe runs makes them ideal for compact installations with limited space.Blind Transmitter: Designed with a 2-Wire loop-powered analog output (4-20mA) for easy connection to a variety of chart recorders, display equipment, and process control equipment. Use the downloadable CDS program to set the 4mA and the 20mA set points, without the need of a digital display. FeaturesDesigned with analog output 4-20mA 2-Wire (using hall effect) for connection to a variety of chart recorders, display equipment, and process control equipmentPPS (Ryton) Oval Gear rotors that provide highly accurate and repeatable direct volumetric readingAluminum housing material for a more economical solution when chemical compatibility, lower pressure and temperature requirements allowNo requirement for flow conditioning or straight pipe runs makes them ideal for compact installations with limited spaceRecommend 100 Mesh (150 &micron) filtration installed prior to meter SpecificationsAccuracy (%of reading) - Meter: +/- 0.5%Repeatability - Meter: +/- 0.03%Metric Operating Fluid Temp - Min: -40°Metric Operating Fluid Temp - Max: 80°Metric Operating Fluid Temp - Units: CStd Operating Fluid Temp - Max: 176°Std Operating Fluid Temp - Min: -40°Std Operating Fluid Temp - Units: FStd Pressure Rating: Flange RuleSafety Classification: Safe Area OnlyStd Flow Range - Min: 4Std Flow Range - Max: 66Std Flow Range - Units: GPMMetric Flow Range - Min: 15Metric Flow Range - Max: 250Metric Flow Range - Units: L/minTechnology: Oval GearLine Size: 1-1/2-inchFitting Type - Meter: #150 ANSI FlangeHousing Material - Meter: AluminumRotor Material - Meter: PPS / No BearingWetted Materials - Meter: Aluminum|FKM|PPSWetted O-Ring/Seal Material - Meter: FKM (Viton)Powered By: loop power source of 12 to 28 VDCField Calibration: NoCable Entry Port: 1/2-inch FNPTStd Typical K-Factor: 106Std Typical K-Factor - Units: PPGMetric Typical K-Factor - Units: PPLApproval - Combined: CEWhat's in the Box: Oval Gear flow meter, operating instructions, Calibration CertificateRecommended Filtration: 100 Mesh (150 µm)Output Type: 4-20 mAInstrumentation Type: Blind TransmitterMinimum Viscosity: 3Maximum Viscosity: 1,000Viscosity Units: cPAccuracy (%of reading) - Meter: +/- 0.5%Repeatability - Meter: +/- 0.03%Metric Operating Fluid Temp - Min: -40°Metric Operating Fluid Temp - Max: 80°Metric Operating Fluid Temp - Units: CStd Operating Fluid Temp - Max: 176°Std Operating Fluid Temp - Min: -40°Std Operating Fluid Temp - Units: FStd Pressure Rating: Flange RuleSafety Classification: Safe Area OnlyStd Flow Range - Min: 4Std Flow Range - Max: 66Std Flow Range - Units: GPMMetric Flow Range - Min: 15Metric Flow Range - Max: 250Metric Flow Range - Units: L/minTechnology: Oval GearLine Size: 1-1/2-inchFitting Type - Meter: #150 ANSI FlangeHousing Material - Meter: AluminumRotor Material - Meter: PPS / No BearingWetted Materials - Meter: Aluminum|FKM|PPSWetted O-Ring/Seal Material - Meter: FKM (Viton)Powered By: loop power source of 12 to 28 VDCField Calibration: NoCable Entry Port: 1/2-inch FNPTStd Typical K-Factor: 106Std Typical K-Factor - Units: PPGMetric Typical K-Factor - Units: PPLApproval - Combined: CEWhat's in the Box: Oval Gear flow meter, operating instructions, Calibration CertificateRecommended Filtration: 100 Mesh (150 µm)Output Type: 4-20 mAInstrumentation Type: Blind TransmitterMinimum Viscosity: 3Maximum Viscosity: 1,000Viscosity Units: cP

This is your item. Ready to proceed?

Add it to your RFQ basket or submit your requirement directly — ACG will respond within 24 hours with pricing, availability and delivery options.

RFQ Basket

Your RFQ basket is empty

Browse the catalogue and add items to build your requirement list Browse catalogue
Search