PART OF THE NOVA PLATFORM · KAMPALA, UGANDA · MALATYA, TURKEY · GLASGOW, SCOTLAND
GPI Flomec OM Series 1 in. NPT Stainless Steel Oval Gear Digital Flow Meter OM025P001-826R7G
GPI

GPI Flomec OM Series 1 in. NPT Stainless Steel Oval Gear Digital Flow Meter OM025P001-826R7G

Part No. OM025P001-826R7G Unit EA
Meter body size 1 in.
Display type Digital LCD (GRN Housing)
Flow meter type OM Series, oval gear
Std calibration reports included Yes
Warranty period 1 year
Product type Rate & Totals
Pricing available on request — ACG will respond within 24 hours with a full proposal.
Send requirement directly
Meter body size 1 in.
Display type Digital LCD (GRN Housing)
Flow meter type OM Series, oval gear
Std calibration reports included Yes
Warranty period 1 year
Product type Rate & Totals
Accuracy +/- 0.5% @ 3cp
Maximum viscosity 1,000 cps
Recommended strainer size 100 Mesh (150 Microns)
Max. particle size .006 in. / .149mm
Wetted materials Housing material: PPS Bearings: none Shaft: carbon ceramic Rotor: PPS Seals: FKM (Viton)
Housing material PPS
Bearings none
Shaft carbon ceramic
Rotor PPS
Seals FKM (Viton)
Display function Rate + 2 totals (1 resettable, 1 cumulative)
LCD Digits 6
Totalizing display starting increment 0.01
Typical K-Factor PPG (PPL) Reed: 120 (27) Hall Effect: 405 (107)

The FLOMEC Chemical Flow Meter provides precise volumetric flow measurement of a broad range of clean water-based products and aggressive chemicals and is also suitable for most fuels, fuel oils, and lubricating liquids. Applications include batching, dosing, or packaging of various corrosive chemicals as a more economical alternative to a complete 316 stainless steel meter for liquids such as Diesel Exhaust Fluid (DEF) / AdBlue. This meter is NOT suitable for strong acids and oxidizers. The FLOMEC RT40 Flow Rate Totalizer LCD display is specifically designed for displaying flow rates and totals from flow meters with pulse, sine wave, or frequency outputs. The instrument displays re-settable (batch) total, cumulative total, and instantaneous flow rate in engineering units programmable by the user. This meter meets ISO 22241-2 Annex C, D, E, F, G, H, I, Diesel Exhaust Fluid (DEF)/Adblue standards. Features Rate totalizer with backlit large-digit LCD with GRN housing (with gallons calibration) PPS Rotors, No Bearing FKM (Viton™) 5º F minimum (-15º C) O-Ring material High accuracy & repeatability, direct reading flow meter No requirement for flow conditioning (straight pipe runs) Measures high & low viscosity liquids Quadrature pulse output option & bi-directional flow. Contact GPI Product Support for options Specifications Meter body size: 1 in. Display type: Digital LCD (GRN Housing) Flow meter type: OM Series, oval gear Std calibration reports included: Yes Warranty period: 1 year Product type: Rate & Totals Accuracy: +/- 0.5% @ 3cp Repeatability (based on test conditions): +/- 0.03% Maximum viscosity: 1,000 cps Recommended strainer size: 100 Mesh (150 Microns) Max. particle size: .006 in. / .149mm Operating temp without local computer or with remote computer: 5 to 176° (-15 to 80°C) Wetted materials: Housing material: PPS Bearings: none Shaft: carbon ceramic Rotor: PPS Seals: FKM (Viton) Display function: Rate + 2 totals (1 resettable, 1 cumulative) LCD Digits: 6 Totalizing display starting increment: 0.01 Typical K-Factor PPG (PPL): Reed: 120 (27) Hall Effect: 405 (107) Local module & output signal: none (RT40) Remote output: none Battery power: (1) 3.6V battery (~3 years) External power: Regulated 8-24VDC x 50mA minimum Totalizing resets to 0 after reaching: 99999999 Sensor (Pickup): Reed switch/hall effect (hall effect sensor requires dedicated power source) Applications Applications (always check Chemical Compatibility Guide): Metering clean fluids such as water based liquids, including water based acids, bases or neutral salts and most fuels, fuel oils and lubricating liquids. Resistant to chemical attack from all non-aromatic (containing benzene), non-halogenated (containing halogens such as chlorine, bromine) organic solvents at any concentration. Suited for heated water, sea water, water with < 1% chlorine up to 176°F. Not suitable for Dirty liquids, strong oxidizing acids, strong bases at high temperatures, oxidizing chemicals in high concentrations, Hydrogen Peroxide, Chlorine and Sodium Hypochlorite Downloads OM025P Owner's Manual (PDF Download) RT40 Owner's Manual (PDF Download) OM025P Data Sheet (PDF Download) RT40 Data Sheet (PDF Download)

This is your item. Ready to proceed?

Add it to your RFQ basket or submit your requirement directly — ACG will respond within 24 hours with pricing, availability and delivery options.

RFQ Basket

Your RFQ basket is empty

Browse the catalogue and add items to build your requirement list Browse catalogue
Search