| Power Supply (AC version) | 110/120 V or 220/240 V AC, 50-60 Hz 12 V or 24 V DC |
| Power Rating | 10 watt |
| Ambient Temperature Range | 40 F to +122 F (-40 C to +50 C) |
| Ingress protection | Type 4X (IP 66) |
| Construction | Copper Free Cast Aluminum |
| Monitoring Circuit | Intrinsically safe |
| Operational Series Ground Resistance | ≤ 1 x 10⁷ or 1 x 10⁸ Ohms |
| Output Relay Contacts Rating | 2 dry contacts; 250 V AC, 5 A, 500 VA max resistive; 30 V DC, 2 A, 60 W max resistive |
| Cable Entries | 7 x 3/4 in. NPT (supplied with 4 stopper plugs) |
| Enclosure Material | GRP with carbon loading |
| Terminals | 2 x AWG #14 conductor capacity |
| Stowage Device | Insulated 0.79 in. diameter pin |
| Clamp Cable Connection | Quick Connect |
| Clamp Design | 1 pole with single stainless steel contact |
| Body | Stainless Steel (SS 304) |
| Certification | Ex II 1 GD T6 |
| Cable | Blue Cen-Stat Hytrel sheath (Static dissipative, chemical & abrasion resistant) |
| Conductors | 1 x AWG #12 steel |
| Length | 5 meters extended, 1 meter unextended |
| SKU | NGFIBC8MUA1A1E |
The Earth-Rite® FIBC system validates and monitors the resistance of Type C FIBC bags ensuring that the conductive elements of the bag are capable of dissipating electrostatic charges in compliance with IEC 61340-4-4 “Standard test methods for specific applications – Electrostatic classification of flexible intermediate bulk containers (FIBC)” and NFPA 77 “Recommended Practice on Static Electricity”. The Earth-Rite FIBC system can be installed and setup to ensure that operators ground the bag before filling or emptying operations are started. During the bag filling / emptying process the Earth-Rite FIBC system continuously monitors the resistance of the bag so that if it rises above the recommended level of ohms (10 meg-ohm) this dangerous situation can be indicated to operators and the process halted, either manually or via the system’s pair of NO/NC volt free contacts. This feature ensures the generation and accumulation of static charges on the bag is stopped eliminating the risk of an electrostatic spark discharge. Note: Several configurations available! Please call for more information. Features Attention Grabbing LEDs: Three green LEDs continuously pulse informing operators that the FIBC bag to be protected from static discharges is correctly grounded - When the system is not in use, or when it detects the resistance in the static dissipative loop is higher than 1 x 10⁷ or 1 x 10⁸ Ohms a red LED illuminates the indicator panel located in the static dissipative GRP indicator station Continuous Ground Loop Monitoring: Monitors the resistance of the static dissipative loop through the FIBC bag back to the Earth-Rite FIBC via the plant earth grounding point - If the system detects that resistance in the loop is higher than 1 x 10⁷ohms, it engages a pair of output contacts Two Volt Free Output Contacts: The primary contact can interlock with electro-mechanical devices or PLC systems to shutdown the flow of product - The secondary contact can interface with attention grabbing audible alarms or strobe lights to provide an extra degree of safety over the hazard Easy Installation: Simple to mount enclosures complemented by straightforward cabling and PCB system wiring - Flexible hazardous area enclosure location options with separate IS monitoring / indicator and Power supply PCBs. Power supply PCB can run off both 240 V and 110 V mains / line supply and 24 V / 12 V DC voltage supply Specifications Power Supply & Monitoring Unit Power Supply (AC version): 110/120 V or 220/240 V AC, 50-60 Hz 12 V or 24 V DC Power Rating: 10 watt Ambient Temperature Range: 40 F to +122 F (-40 C to +50 C) Ingress protection: Type 4X (IP 66) Construction: Copper Free Cast Aluminum Monitoring Circuit: Intrinsically safe Operational Series Ground Resistance: ≤ 1 x 10⁷ or 1 x 10⁸ Ohms Output Relay Contacts Rating: 2 dry contacts; 250 V AC, 5 A, 500 VA max resistive; 30 V DC, 2 A, 60 W max resistive Cable Entries: 7 x 3/4 in. NPT (supplied with 4 stopper plugs) Junction Box/Stowage Point Enclosure Material: GRP with carbon loading Terminals: 2 x AWG #14 conductor capacity Stowage Device: Insulated 0.79 in. diameter pin Cable Entries: 1 x M20 Clamp Cable Connection: Quick Connect Grounding Clamp Clamp Design: 1 pole with single stainless steel contact Body: Stainless Steel (SS 304) Certification: Ex II 1 GD T6 Spiral Cable Cable: Blue Cen-Stat Hytrel sheath (Static dissipative, chemical & abrasion resistant) Cable: Orange Cen-Stat Hytrel sheath (Static dissipative, chemical & abrasion resistant) Conductors: 1 x AWG #12 steel Length: 5 meters extended, 1 meter unextended Downloads FIBC Static Grounding Protection Datasheet (PDF Download) FIBC Static Grounding Protection Application Spotlight (PDF Download)
This is your item. Ready to proceed?
Add it to your RFQ basket or submit your requirement directly — ACG will respond within 24 hours with pricing, availability and delivery options.