| Arbor Hole Diameter (Decimal Inch) | 5.0000 |
| Arbor Hole Diameter | 5.0 in; 127.0 mm; 5 in |
| Arbor Hole Diameter (Inch) | 5 |
| Arbor Hole Diameter (mm) | 127.00 |
| Operation Type | Semi-Automatic |
| Machine Type | Grinder |
| Spindle Speed | 1750.0 |
| Table Length | 28 in |
| Wheel Diameter (Inch) | 14 |
| Table Width | 12 in |
| Wheel Diameter | 14 in |
| Wheel Width (Decimal Inch) | 14.0000 |
| Wheel Width (Inch) | 14 |
| Wheel Width | 14.0 in |
| Phase | Three |
| Maximum Cross Grinding Width (Decimal Inch) | 12.0000 |
| Maximum Cross Grinding Width (Inch) | 12 |
| Maximum Cross Grinding Width (mm) | 12.00 |
| Maximum Longitudinal Grinding Length (Inch) | 28 |
| Hydraulic Motor Horsepower (HP) | 3.00 |
| Maximum Manual Crossfeed Transverse Travel (Inch) | 27 |
| Maximum Cross Grinding Width | 12.0 in |
| Maximum Spindle Centerline To Table Distance | 24.8 in |
| Maximum Spindle Centerline to Table Distance (mm) | 24.80 |
| Maximum Longitudinal Table Travel | 37.8 in |
| Maximum Longitudinal Grinding Length | 28.0 in |
| Feed Per Graduation Of Handwheel | 0.0008 in |
| Maximum Manual Crossfeed Transverse Travel | 27 in; 15.0 in |
| UNSPSC Code | 23241402 |
| Feed Per Revolution Of Handwheel | 0.2 in |
| Feed Rate Per Graduation Of Handwheel | 0.02 mm |
| Feed Rate Per Revolution Of Handwheel | 5.0 mm |
| Overall Length (Inch) | 116 |
| Voltage | 230/460V (Optional 208V) V |
| Overall Length | 116.0 in |
| Vertical Downfeed Handwheel Per Graduation | 0.005 mm; 0.2 in |
| Vertical Downfeed Handwheel Per Revolution | 1.0 mm; 0.04 in |
| Max. Longitudinal Grinding Length (Decimal Inch) | 28.0000 |
| Max. Spindle Center to Table Dist. (Decimal Inch) | 24.8000 |
| Max. Hydraulic Long. Table Travel (Decimal Inch) | 37.8000 |
| Max. Manual Cross Transverse Travel (Decimal Inch) | 15.000000 |
| Feed Per Revolution of Handwheel (Decimal Inch) | 0.2000 |
| Feed Rate Per Revolution of Handwheel (mm) | 5.00 |
| Feed Per Graduation of Handwheel (Decimal Inch) | 0.0008 |
| Feed Rate Per Graduation of Handwheel (mm) | 0.02 |
| Vertical Down Handwheel Per Rev. (Decimal Inch) | 0.0400 |
| Vertical Downfeed Handwheel Per Revolution (mm) | 1.00 |
| Vertical Down Handwheel Per Grad. (Decimal Inch) | 0.2000 |
This is your item. Ready to proceed?
Add it to your RFQ basket or submit your requirement directly — ACG will respond within 24 hours with pricing, availability and delivery options.