PART OF THE NOVA PLATFORM · KAMPALA, UGANDA · MALATYA, TURKEY · GLASGOW, SCOTLAND
GORMAN-RUPP S4B1-E50 4 in. NPT Ductile Iron Widebase Submersible Dewatering Pump, 460V 3P, 1000 GPM S4B1-E50 460/3
Gorman-Rupp

GORMAN-RUPP S4B1-E50 4 in. NPT Ductile Iron Widebase Submersible Dewatering Pump, 460V 3P, 1000 GPM S4B1-E50 460/3

Part No. S4B1-E50 460/3 Unit EA
Part S4B1-E50 460/3
Series S Series - Widebase Submersible
Model S4B1-E50
Suction 4 in. (100 mm.)
Discharge 4 in. (100 mm.)
Flange NPT
Pricing available on request — ACG will respond within 24 hours with a full proposal.
Send requirement directly
Part S4B1-E50 460/3
Series S Series - Widebase Submersible
Model S4B1-E50
Suction 4 in. (100 mm.)
Discharge 4 in. (100 mm.)
Flange NPT
Flow-Rate 1000 GPM
Solids Handling 0.63 in. (16 mm.)
Casing Ductile Iron
Impeller/Rotor Ductile Iron
Drive 460V 3 Phase Electric Motor
Seal Tungsten Carbide
Diffuser Ductile Iron 80-60-03; Maximum Operating Pressure 132 psi (910 kPa)*
Semi-Open Type, Six Vane Impeller Ductile Iron 80-60-03
Suction Head Ductile Iron 80-60-03
Motor Housing Aluminum Alloy 356-T6
Intermediate Bracket Aluminum Alloy 356-T6
Strainer Plate Aluminum Alloy 356-T6
Motor Shaft Stainless Steel 17-4 PH
Bearings Upper, Open Single Row Ball; Lower, Sealed Double Row Ball

Gorman-Rupp Widebase submersible dewatering pumps tackle the big jobs. Where large solids are not a problem, these versatile models offer high-head, high-volume operation and stand up to the abuses of the worst conditions. Whatever the application - general construction, strip mining, tunnel work or general purpose - Gorman-Rupp Widebase pumps are built to operate quietly, effectively and safely. Note: Control panel included. Disclaimer: Please call 1-800-333-3331 for detailed information concerning your model. Parts lists can sometimes vary from pump to pump. Your serial number is critical in determining the correct parts and service requirements for your pump. Information on this page is provided for reference only. Warning: Do not use in explosive atmosphere or pump volatile flammable liquids. Features High Head, High Volume Solutions: Gorman-Rupp Wide Base Submersibles are designed for applications where high volume and high head are required, and large solids are not a problem - Pumps have only two moving parts and three wearing surfaces so maintenance and repairs are minimal Abrasive Handling Impeller: Abrasion-resistant ductile iron and manganese bronze impellers stand up to sand, gravel and other abrasive materials - The fully shrouded impeller back reduces seal pressure and helps prevent foreign material from entering the seal cavity - Seal life is extended and operational life of the pump is increased. Optional impellers of CD4mCu are available for corrosive/abrasive applications Dual Seals, Double Protection: Primary seal keeps dirty water in the pump end and prevents contamination of the oil cavity - A second "fail safe" seal provides extra protection against the possibility of damage to the motor - Positive oil lubrication enables the pump to run dry without seal damage Corrosion-Resistant Stainless Hardware: Rotor shaft and all internal nuts and bolts coming in contact with the liquid are made of stainless steel to resist corrosion and pitting and extend the operational life of the pump - For severely corrosive/abrasive applications, stainless steel lifted pump models of CD4MCu are available Specifications Pump Specifications: Part: S4B1-E50 460/3 Series: S Series - Widebase Submersible Model: S4B1-E50 Suction: 4 in. (100 mm.) Discharge: 4 in. (100 mm.) Flange: NPT Flow-Rate: 1000 GPM Solids Handling: 0.63 in. (16 mm.) Casing: Ductile Iron Impeller/Rotor: Ductile Iron Drive: 460V 3 Phase Electric Motor Seal: Tungsten Carbide Diffuser: Ductile Iron 80-60-03; Maximum Operating Pressure 132 psi (910 kPa)* Semi-Open Type, Six Vane Impeller: Ductile Iron 80-60-03 Suction Head: Ductile Iron 80-60-03 Motor Housing: Aluminum Alloy 356-T6 Intermediate Bracket: Aluminum Alloy 356-T6 Strainer Plate: Aluminum Alloy 356-T6 Motor Shaft: Stainless Steel 17-4 PH Bearings: Upper, Open Single Row Ball; Lower, Sealed Double Row Ball Discharge Flange: Gray Iron 30 Gaskets: Cork w/ Nitrile Binder (NC710) and Vegetable Fiber O-Ring: Synthetic Rubber (DuPont Neoprene or Equivalent) Wetted Hardware: Standard Plated Steel and Stainless Steel Strainer: Urethane Coated Steel; 48% Open Area, 0.62 in. (15,7 mm) Square Openings Hoisting Bail. Urethane Coated Steel Standard Equipment: NEMA Type 3R Rainproof Control Box: Provides On-Off, Circuit Breaker and Motor Overload Protection Optional Equipment: Liquid Level Control Turtle Type Pressure Activated Level Switch Float Activated Level Switch Staging Adapter Kit Motor/Cable Specifications: Motor: Oil Filled Enclosure; 50 H.P.; 1750 R.P.M.; Three Phase: 460/575 Volt, 60 Hz, 71/57 Full Load Amps, 46 kW (Max.) Power Cable: (460V) 6 Wire; Type GGC; 4 AWG. 3 Power Conductors, plus 2 Ground Conductors and 1 Ground Check. (575V) 6 Wire; Type GGC; 6 AWG. 3 Power Conductors, plus 2 Ground Conductors and 1 Ground Check. Nominal Length 50 Feet (15 m) Standard. (Specify Alternate Length at Time of Order.) Recommended Generator Size: 60 kW Across the Line Start,40 kW for Reduced Voltage …

This is your item. Ready to proceed?

Add it to your RFQ basket or submit your requirement directly — ACG will respond within 24 hours with pricing, availability and delivery options.

RFQ Basket

Your RFQ basket is empty

Browse the catalogue and add items to build your requirement list Browse catalogue
Search