PART OF THE NOVA PLATFORM · KAMPALA, UGANDA · MALATYA, TURKEY · GLASGOW, SCOTLAND
DIXON Brass Male NPT 90° Elbow x Push-On Hose Barb Fittings 2730404C
Dixon

DIXON Brass Male NPT 90° Elbow x Push-On Hose Barb Fittings 2730404C

Part No. 2730404C Unit EA
Pressure rating 350 PSI
Operating temperature -40° to 150° F ( -40° to 65° C)
Approval SAE J476, J512, J514 and J516
SKU Please choose an option below
Manufacturer Dixon
Product Type Male NPT 90° Elbow x Push-On Hose Barb
Pricing available on request — ACG will respond within 24 hours with a full proposal.
Send requirement directly
Pressure rating 350 PSI
Operating temperature -40° to 150° F ( -40° to 65° C)
Approval SAE J476, J512, J514 and J516
SKU Please choose an option below
Manufacturer Dixon
Product Type Male NPT 90° Elbow x Push-On Hose Barb
Material Brass
Weight 0.06 LBS

Dixon Brass Male NPT 90° Elbow x Push-On Hose Barb Fitting Dixon push-on 90° elbow hose barb fittings are intended for use with Lok-On/ push-on style hoses only. No hose clamps or ferrules are needed. Full size range from 1/4 in. hose through 3/4 in.  hose. Caution: Push-on fittings will properly grip push-on hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap. Features Compatible hoses: Eaton Aeroquip: 2556, 2565, 2575, FC647, and FS332/ Eaton Weather head: H100, H101, and H201/ Gates: LOL, Python/ Goodyear: Auto grip, Insta-Grip, and Ultra-Grip/ Parker Hannifin: 801, 804, 821, 831, 836, and B7 Applications Pneumatic service Most fluids Low pressure hydraulics Non-potable water service Specifications 90° Elbow Male pipe push-on fitting Forged construction Pressure rating: 350 PSI 377 brass Plastic yellow cap Operating temperature: -40° to 150° F ( -40° to 65° C) Do not use worm gear hose clamps or crimped ferrules Approval: SAE J476, J512, J514 and J516 Assembly (1) Trim hose end with smooth square cut (2) Lubricate either push-on fitting or hose, or both (3) Insert push-on fitting into hose until the first barb in in hose (4) Place end of fitting against a flat object and grip the honse 1 inch from the end. Push with a steady force until end of hose is covered by yellow plastic cap. Disassembly (1) Leave push-on fitting in place and make a 1 in. cut in the hose along the barbed end of the fitting. Be careful not to nick barbs when cutting the hose. (2) With a firm grip on the hose, give a sharp downward pull to release the fitting from the hose. Downloads Data Sheet (PDF Download) Catalog Page (PDF Download) MSDS (PDF Download)

This is your item. Ready to proceed?

Add it to your RFQ basket or submit your requirement directly — ACG will respond within 24 hours with pricing, availability and delivery options.

RFQ Basket

Your RFQ basket is empty

Browse the catalogue and add items to build your requirement list Browse catalogue
Search