Clausing 15-3/4" x 50" Engine Lathe: Frequency, 10 hp, 230 V-3 Phase, 2-1/8" Spindle Bore Dia, 14 to 2,500 RPM
Brand Name:
Clausing
MFR Code::
V390-EW
| Phase | : | Three |
| Spindle Speed Control | : | Frequency |
| Bed Width (Inch) | : | 12.5197 |
| Bed Width | : | 318 mm; 12.5197 in |
| Distance Between Centers (Inch) | : | 50 |
| Distance Between Centers | : | 50 in |
| Cross Slide Travel | : | 9.875 in; 250.83 mm |
| Gap Length (Decimal Inch) | : | 6.5000 |
| Gap Length | : | 165.1 mm; 6.5 in |
| Cross Slide Travel (Inch) | : | 9-7/8 |
| Cross Slide Travel (Decimal Inch) | : | 9.8750 |
| Swing (Inch) | : | 15-3/4 |
| Spindle Bore Diameter (Inch) | : | 2-1/8 |
| Minimum Spindle Speed | : | 14 |
| Spindle Nose Designation | : | D1-6 |
| Maximum Spindle Speed | : | 2500 |
| Overall Height | : | 65 in |
| Overall Depth | : | 53 in |
| Minimum Metric Pitch (Decimal Inch) | : | 0.0079 |
| Number of Inch Threads | : | 56 |
| Minimum Metric Pitch | : | 0.0079 in |
| Spindle Taper Size | : | 4MT |
| Tailstock Taper Size | : | 5MT |
| Tailstock Travel (Decimal Inch) | : | 5.6875 |
| Tailstock Travel | : | 5.6875 in; 144.46 mm |
| UNSPSC Code | : | 23242300 |
| Maximum Threads Per Inch | : | 56 |
| Min. Longitudinal Feed Per Rev. (Decimal Inch) | : | 0.0181 |
| Overall Depth (Inch) | : | 53 |
| Overall Length (Inch) | : | 107 |
| Max. Longitudinal Feed Per Rev. (Decimal Inch) | : | 1.1811 |
| Maximum Longitudinal Feed Per Revolution | : | 30 mm; 1.1811 in |
| Minimum Cross Feed Rate Per Revolution | : | 0.0007 in |
| Min. Cross Feed Rate Per Revolution (Decimal Inch) | : | 0.000700 |
| Max. Cross Feed Rate Per Revolution (Decimal Inch) | : | 0.0480 |
| Maximum Cross Feed Rate Per Revolution | : | 0.048 in; 1.22 mm |
| Swing Over Cross Slide (Decimal Inch) | : | 9.6250 |
| Swing Over Cross Slide (Inch) | : | 9-5/8 |
| Swing Over Gap (Inch) | : | 23 |
| Swing Over Gap (Decimal Inch) | : | 23.0000 |
| Swing Over Gap | : | 23 in; 584.2 mm |
| Series | : | Harrison |