Jet Floor Drill Press: 22" Swing, 1-1/2 hp, Belt Drive, 115 & 230 V, 1 Phase-175 to 3,050 RPM, 3MT & 3MT, 12 Speed, 4-13/16" Spindle Travel Length
Brand Name:
Jet
MFR Code::
354301
| Drive Type | : | Belt |
| Swing Distance | : | 22 in |
| Swing Distance (Decimal Inch) | : | 22.0000 |
| Swing Distance (Inch) | : | 22 |
| Spindle Speed Control | : | Step Pulley |
| Phase | : | Single |
| Spindle Taper Size | : | 3MT |
| Minimum Spindle Speed | : | 175 |
| Maximum Spindle Speed | : | 3050 |
| Minimum Spindle Speed (RPM) | : | 175 |
| Maximum Chuck Capacity | : | 0.63 in |
| Maximum Spindle Speed (RPM) | : | 3050 |
| Number of Spindle Speeds | : | 12 |
| Spindle To Column Distance | : | 10.875 in |
| Spindle to Column Distance (Inch) | : | 10-7/8 |
| Spindle to Table Distance (Inch) | : | 28 |
| Spindle Travel Length | : | 4.8125 in |
| Spindle Travel Length (Decimal Inch) | : | 4.8125 |
| Spindle To Table Distance | : | 28 in |
| Spindle Travel Length (Inch) | : | 4-13/16 |
| Column Diameter (Inch) | : | 3-5/8 |
| Drilling Capacity in Steel (Inch) | : | 1 |
| Drilling Capacity in Cast Iron (Inch) | : | 1-1/4 |
| Drilling Capacity In Steel | : | 1 in |
| UNSPSC Code | : | 23241801 |
| Table Slot Size | : | 0.75 in |
| Table Length (Decimal Inch) | : | 18.6250 |
| Table Load Capacity | : | 176 |
| Table Length | : | 18.625 in |
| Table Width | : | 16.125 in |
| Base Length (Inch) | : | 21-1/2 |
| Overall Height | : | 67 in |
| Overall Depth (Inch) | : | 19 |
| Overall Length | : | 35 in |
| Overall Depth | : | 19 in |